Business Financing Available

 
552A4384-Edit[1].jpg

    Click for Pricing

    WHC Water Height Control
    PRO Water Height Control
    Boss Sander

    BOSS Tables – your premier plasma cutting machine manufacturer – provides the Light industrial market with a feature rich, affordable CNC plasma table without the heavy cost. We provide you with the simple and effective means that yield consistent results.

    Construction & Features

    Quality Engineering & Fabrications


    Every industrial CNC plasma table made by Boss Tables – a leader among CNC plasma table manufacturers – has a fully welded and boxed frame to ensure a tough and solid machine. All 4 sides are constructed from 3/16 steel that are welded to the frame. The Gantry has a 16” wide footprint with Linear Bearings riding on 2 full length dual 35mm thick rails to provide smooth and straight linear motion. Full floating rails provide a perfectly symmetrical rail system with this plasma sheet metal cutting machine that delivers effortless motion and repeatability.

    Curved slats provide extended life and the 3-inch spacing provides room for part removal. The roller ball assisted loading and oversized cut area will allow you to easily place sheets on the table. The cable management and portable operating stand allow flexibility for your shop. With a maximum material height of 10 inches, you can take on more jobs. Coupled with Feather touch, Digital Torch Height, and Collision Detection you can achieve the results you need every time.

    Boss Agent Table

    Water Level Management
    (excludes LITE Series)

    With the air Blatter system, we provide with this plasma CNC machine for sale you can adjust the water level depending on the material being cut, and/or under water to reduce warping. Draining the cutting area will allow you to find the pieces you’re cutting out.  With a drain time of 1.5 minutes and a fill time of 1 you will keep production moving. Access holes and drains are provided for the lower tank as well.

    552A4449[1].jpg
    552A4574[1].jpg

    Z Axis

    BOSS Z Axis is designed, machined, and built in the USA. Ball Screw (NOT lead screw) provides a smooth and effortless motion. The Linear rails ensure ridged travel and wipers remove any debris.
    Magnetic torch breakaway / manual bevel is self-centering and provides protection and constant torch placement. One benefit of having a magnetic torch as a feature of this CNC plasma cutting system is the ability to inspect the torch and change tips with ease.

    Ohmic Sensing, collision sensor, and digital torch height control are also provided with your BOSS Table at no extra charge.

    Drive Motors

    Motion is created by Clearpath Teknic Servo motors (Pro Model) or dual 980 Oz Stepper motors (WHC Model) coupled with NEMA 34 Planetary Gear Box for a long service life. Helical rack and pinion create a dependable and reliable way to transfer energy, eliminating belts and chains needed to drive components. The motors, planetary gears, bearings, and rack and pinion are mounted on the side of the machine, reducing the amount of debris. The components are also protected by a shield that blocks flying particles.

    552A4298[1].jpg

    Control Center

    Running your BOSS CNC plasma burn table is simple with the operator’s council. Located inside is every electronic component the table needs to run. Casters and rigid flexible conduit allow you to place the operator stand where you need it. Software, computer, and licenses are all provided with the unit.

     

    Learn more about software and control center.

    Click for Pricing

    WHC[5268].jpg
    New Project (2).jpg

    Contact Us

    Address:

    Boss Tables 

    204 E. Main St.
    Calmar, IA 52132

    Mailing Address:

    Boss Tables  

    PO Box 236       
    Calmar, IA 52132-0236

    Your details were sent successfully!