accessory

Ensure an adequate pressure level to operate and maximize the performance of your HD Machine.


HD (High-Definition)

  • Stands at a Height of 39″ with Wheels for Mobility
  • Features a Locking Door with Key for Security
  • Equipped with a Convenient Shelf
  • Includes a Gas Strut Flexi Monitor Mount


Easily manage virtually every aspect of your FlashCut-based machine from the palm of your hand.


Achieve precise and effortless torch alignment and positioning.


Keep your Boss Table running at peak performance with a Maintenance plan that suits your needs.

Boss will have an on-site technician replace key components and conduct a thorough inspection of your table.


  • Cut Up to 8 Inches Thick Steel with VICTOR MT310 Machine Torch
  • FlashCut-10 with 2D CAD/CAM/CNC and Enhanced Oxy Fuel Features
  • Includes Reverse Flow Check Valves
  • Compatible with Oxygen: Acetylene/Propylene
  • A Comprehensive Complete System


  • Cut Up to 8 Inches Thick Steel with VICTOR MT310 Machine Torch
  • FlashCut-10 with 2D CAD/CAM/CNC and Enhanced Oxy Fuel Features
  • Includes Reverse Flow Check Valves
  • Compatible with Oxygen: Acetylene/Propylene
  • A Comprehensive Complete System


By utilizing High/Low preheat settings, you gain the capability to reduce pierce times, leading to enhanced overall job completion times.


  • CP 9361 Scribe
  • Sturdy Aluminum Mount with Linear Rail
  • Adjustable Up/Down Pressure and Hammer Strength
  • Valves Located on the Back of the Table


  • CP 9361 Scribe
  • Rigid Aluminum Mount with Linear Rail
  • Adjustable Up/Down pressure, and Hammer Strength
  • Valves Located on Back of Table


  • CP 9361 Scribe
  • Sturdy Aluminum Mount with Linear Rail
  • Adjustable Up/Down Pressure and Hammer Strength
  • Valves Located on the Back of the Table


Utilizing 2-stage regulators to provide Oxygen and Argon for steel cutting.


Utilizing 2-stage regulators to deliver Hydrogen, Nitrogen, and F5 for non-ferrous cutting.


(Only available with FlashCut operating system)

  • Cuts 5″ Tube Directly on Your Plasma Table.
  • Includes 4-Jaw Chuck for Round Tube Cutting.
  • FlashCut CAD/CAM
  • Upgrade From 4-Axis to 5-Axis


  • Cuts 8″ Tube Directly on Your Plasma Table.
  • Includes 4-Jaw Chuck for Round Tube Cutting.
  • FlashCut CAD/CAM
  • Upgrade From 4-axis to 5-axis


Router Mounting, Programming, and Wiring:

Note: You’ll need to provide the spill board.


Router Mounting, Programming, and Wiring:

Note: You’ll need to provide the spill board.


  • Travel from one end of the table in under 4 seconds.
  • Experience increased production capabilities.
  • Rapid travel speed of 1800 IPM.
  • Enjoy the benefits of a closed-loop system..


WHC